Home /
Subsurface Instruments PL-1500 High Frequency Pipe And Cable Locator - PL-1500 High

Subsurface Instruments PL-1500 High Frequency Pipe And Cable Locator - PL-1500 High

More Views

Subsurface Instruments PL-1500 High Frequency Pipe And Cable Locator - PL-1500 High

Manufacturer Part Number(s): PL-1500 High

Email to a Friend

Be the first to review this product

SubSurface Authorized Dealer

8 kHz Receiver and 3.0 Watts Transmitter

Availability: In stock

$2,560.25

Qty:

Product Description
Additional Information
Reviews (0)
Questions (0)

Product Description

The PL-1500 pipe and cable locator is a single frequency locator that comes in a 8 kHz Low or a 83 kHz High model. The Pl-1500 is a very durable unit that is a work of art in its simplicity of use and sophistication of operation. There are no menus to learn; just three ways of applying a signal (conductive, clamp and inductive, which not all locators offer). So you're sure to locate all utilities. Plus, the PL-1500 is lightweight, compact and designed to withstand the everyday demands you place on it.

Transmitter Specifications
Size:	11.0 in x 9.5 in x 4.1 in (29.9 cm x 24.1 cm x 10.4 cm)
Weight:	5.5 lbs (2.5 kg)
Input Power:	DC 12 volts (Eight (8) "D" size batteries or external 12v battery)
Battery Life:	≈ 20 Hours Typical (Alkaline) ≈ 12 Hours at Max Power
Operating Temperature:	14° to 122° F (-10° to 50° C)
Frequency:	83 kHz (PL-1500 High)
Output Power:	0.5 Watt Inductive Mode, 1.0 Watt Direct Mode (PL-1500 High)
Transmitting Mode:	Continuous Wave (non-modulating)
Antenna:	Single-Coil
Depth Accuracy:	0 to 78 inches: Within 5% 78 to 197 inches: Within 10%
Warranty:	3 Years

Receiver Specifications
Size:	5.2 in x 11.0 in x 24.0 in (13.2 cm x 27.9 cm x 61.0 cm)
Weight:	3.5 lbs (1.6 kg)
Power Supply:	DC 9 Volts (six (6) "AA" batteries)
Battery Life:	More than 40 Hours (Alkaline)
Operating Temperature:	14° to 122° F (-10° to 50° C)
Frequency Display:	83 kHz (PL-1500 High) "Live Cable" Mode: 50/60 Hz AC
Operating Modes:	"Peak" (or "Max"), "Live Cable"
Sensitivity:	Continuous Bar Graph with Auto Sensitivity Adjustment
Warranty:	3 Years

Features

PL-1500 High transmitter has 1.0 Watt power output in the Direct Connection mode.

PL-1500 receivers weigh just 3.5 pounds, with large, easy-to-read LCDs and thumb-controlled switches.

The single vertical bar (line) in the receiver is the "peak hold" feature. The peak hold shows the maximum signal measured in the last three seconds.

Press the PL-1500 receiver's "depth" switch and the depth is displayed (down to 16 feet deep).

PL-1500 transmitters show the actual, measured output current in the Direct Connection mode. If the output current is low, just increase the output power level or move the ground stake.

Padded carrying case

Additional Information

Model Number	PL-1500 High
Manufacturer Part Number(s)	PL-1500 High
Manufacturer	SubSurface Instruments
Short Description	8 kHz Receiver and 3.0 Watts Transmitter